HP 2.5 1.6TB SAS 779176-B21

HP 2.5 1.6TB SAS 779176-B21

Ezt a terméket egyik partnerünk sem forgalmazza. Kérjük, válasszon az alábbi termékek közül!

További termékek a kategóriából

További HP termékek: HP Belső SSD meghajtó

Samsung PM1643A 2.5 960GB (MZILT960HBHQ-00007) Belső SSD meghajtó 113 360 Ft-tól Samsung PM1643A 2.5 960GB (MZILT960HBHQ-00007) HP 2.5 960GB SAS 12Gb/s (P10448-B21) Belső SSD meghajtó 191 140 Ft HP 2.5 960GB SAS 12Gb/s (P10448-B21) HP 960GB SAS RI SFF SC SSD (P19903-B21) Belső SSD meghajtó 355 015 Ft-tól HP 960GB SAS RI SFF SC SSD (P19903-B21) HP MSA 960GB SAS 12G Read Intensive SFF (2.5in) 3yr (R0Q35A) Belső SSD meghajtó 298 398 Ft HP MSA 960GB SAS 12G Read Intensive SFF (2.5in) 3yr (R0Q35A)
Termékleírás
Kialakítás 2,5 inch
Kapacitás 1600 GB
Maximális SSD olvasási sebesség 1000 MB/s
Maximális SSD írási sebesség 565 MB/s
Csatlakozók
SAS

Méretek

Szélesség 184 mm
Mélység 222 mm
Tömeg 450 g

Hibát talált a leírásban vagy az adatlapon? Jelezze nekünk!

779176-B21 HP Enterprise Mainstream Endurance Enterprise Mainstream H2
  • Solid state drive
  • 1.6 TB
  • hot-swap
  • 2.5" SFF
  • SAS 12Gb/s
  • with HP SmartDrive carrier
Hewlett Packard Enterprise 779176-B21. Solid-state drive capacity: 1600 GB, Solid-state drive interface: SAS, Read speed: 1000 MB/s. SSD form factor: 2.5". Width: 184.2 mm, Depth: 222.3 mm, Height: 139.7 mmHP Enterprise Mainstream SAS and SATA SSDs are best suited for high I/O applications with workloads balanced between reads and writes. The SAS and SATA SSDs provide the workload-optimized performance required for demanding I/O-intensive applications. When paired with HP ProLiant servers, these SSDs help you meet the challenges of Big Data. They achieve twice the performance and endurance of previous HP SAS and SATA SSDs. The SATA SSDs come with a six gigabit per second (Gb/s) SATA hot-plug interface. Do you need more performance from your HP ProLiant Sever series platforms? HP Enterprise Solid State Drives (SSDs) deliver exceptional performance and endurance while reducing power consumption for customers with applications requiring high random read and write IOPs performance. You can prevent data loss and monitor the SSD life with HP SmartSSD Wear Gauge compatibility in management tools. Leveraging NAND Flash technology, they support HP ProLiant servers including Gen9 and server storage platforms. Because they are available as Small Form Factor (SFF) and Large Form Factor (LFF) hot plug devices, non-hot plug SFF devices, and SFF Quick Release devices, you have great flexibility in your installation. These drives deliver higher performance, better latency, and more power-efficient solutions when compared with traditional rotating media (HDDs). Plus they fit seamlessly into the existing HP server infrastructure.
  • Higher performance and better latency
    HP SSDs enable rapid reads and writes of transactional data. On an HDD, random reads require constant repositioning of the read/write head to seek the exact location of data on the platter before the data transfer can begin. However, SSDs have no moving parts or rotating platters that can cause latency problems, and that results in faster access to data. Therefore, with faster seek times, the drives achieve high IOPS, producing quicker data access and better latency. The drives also pack the operating performance of several rotating HDDs into the same space as a single HDD, so you can get more performance out of your existing data center.
  • Lower power consumption
    Steadily increasing storage requirements pose power and performance challenges to data centers. Solid state devices have a significantly better performance-to-power rating than traditional rotating HDDs. The lack of a motor greatly reduces an SSD's power consumption, so the drives draw less energy - less than two watts idle and less than nine watts maximum - for SSDs.
  • Environmental ruggedness
    The inherent environmental ruggedness of SSDs makes them well suited for extreme environments where traditional drives cannot operate. The drives can tolerate significantly higher operating shock and vibration levels compared to traditional rotating HDDs. In fact, they virtually eliminate rotational vibration problems.
  • High reliability
    Reliability is important for any storage medium, and it is essential when considering a storage device that can be used in servers. HP Enterprise SSDs pass a rigorous HP ProLiant qualification of 2.4 million test hours.
  • Investment protection
    HP Enterprise SSDs are a drop-in replacement for existing HDDs. They fit into existing HDD hot-plug bays and require no modification to operating system or infrastructure tools. The drives are recognized as standard SAS or SATA devices with no special changes in firmware or hardware. Although you cannot mix SSDs and HDDs in the same logical array, you can mix them within the system to provide a more effective use of both technologies.


Így is ismerheti: 2 5 1 6 TB SAS 779176 B 21, 2516TBSAS779176B21, 2.5 1.6TB SAS 779176 B21, 2516TBSAS779176-B21, 2 .5 1.6TB SAS 779176-B2 1, 2.5 1.6TB SAS 779176-B 21

Galéria

Vélemények

Oldalainkon a partnereink által szolgáltatott információk és árak tájékoztató jellegűek, melyek esetlegesen tartalmazhatnak téves információkat. A képek csak tájékoztató jellegűek és tartalmazhatnak tartozékokat, amelyek nem szerepelnek az alapcsomagban. A termékinformációk (kép, leírás vagy ár) előzetes értesítés nélkül megváltozhatnak. Az esetleges hibákért, elírásokért az Árukereső nem felel.